Who can properly jet my bike near North Central WV?

[RideWV]

I have a 2001 Kawasaki ZR-7S that has a ,common for the model,  off idle stumble due to a lean condition at small throttle opening.  There really isn't a jet kit, off the shelf, that consistently works on this bike from the research I've done.

Does anyone know of any shop with a dyno that can properly jet a motorcycle within reasonable range of North Central WV?

James

[ST for me!]

You won't need a dyno for this purpose, I highly recommend KSR in Grafton.

[RideWV]

KSR doesn't work on street bikes unfortunately.

Thanks for the suggestion though, I didn't know about them and it might come in handy in the future.

James

[ST for me!]

Oh man, didn't know about the street bike thing. Sorry about that.   Definitely keep him in mind for the dirt though!

[Hunter]

Have you checked out the Ivans jet kit?

http://www.ivansperformanceproducts.com/zr7.htm

I've used DynoJet and Factory jet kits in the past and it was hit and miss. Last time I installed a Dynojet kit I must have taken the carbs on and off at least 4 times to get it right. The Ivans was spot on out of the box.

[RideWV]

No prob on the dirt bike only thing.

I've researched the DynoJet kits and saw that people pretty much warned against them.  I did not even know there was an Ivan's kit.  That's great news.  Thanks.

James

[black hills]

I have no idea what it has for needles, but a little experimenting (if you are the mechanical type) won't hurt anything. If you raise the needle a notch (drop the clip) and or go up one or two on the pilot and see what happens.