TwinMax data point

[Mr. Whippy]

For those of you with 2V Ducatis (at least):

The TwinMax is an easy way to sync the Throttle bodies.

I just pulled vaccuum lines off of each of the Intake manifolds (lines from the evaporative cannister), and attached the TwinMax.

Balancing is done with the balancing screw between the two throttle bodies.

Really easy.

[Mr Sunshine]

You can't do it with a closed loop bike as the ECU will adjust things as you fiddle and it'll not make it right.  So you need to have access to the right computer to tell the ECU to stop it why you are syncing the throtle bodies.

[Mr. Whippy]

I don't have a gas tester, but seems right by the VDSTS data.

I'll give it a run tomorrow and know for sure.