Pages: 1 2 [3]  All   Go Down
Print

Topic: Replace my crashed GSXR with Griso ?  (Read 4036 times)

0 Members and 2 Guests are viewing this topic.
et
*

Reputation 11
Offline Offline

Years Contributed: '08
Years Supported: '11
Motorcycles: '04 sv650s, '10 Griso
Miles Typed: 728

My Photo Gallery



WWW

Ignore
« Reply #40 on: January 06, 2012, 11:04:56 AM »

I hope this is not signs of things to come.

Dealer attempted to install map #68.
The ECU is now dead.
Supposedly it is failing with an "ECU disconnect" error code.
Piaggio has agreed to replace the ECU under warrantee; since they are the ones who gave the dealer the access code.

So as it stands now; brand new Griso is dead after only ~2,000 miles.   Angry3

--ET
Logged

It's only called commuting if you are using four wheels; if you're using two wheels it's called riding.
Members, please login to hide this ad.

Guests, please register to hide this ad.
« Reply #40 on: January 06, 2012, 11:04:56 AM »

 Logged
Biking Sailor
*

Reputation 5
Offline Offline

Years Contributed: '10
Years Supported: '11
Motorcycles: Couple of Guzzis, couple of Suzukis, and a Honda, and a Kawasaki.
GPS: Edmond, OK
Miles Typed: 601

My Photo Gallery


Fast and smooth, or you will be caught!




Ignore
« Reply #41 on: January 06, 2012, 11:11:09 AM »

I had some early issues with my dash, but were taken care of under warranty and my 1200 Sport has been good since, currently at 22000 miles.

Hope it works out for you after this is sorted.
Logged

"Your Guzzi isn't here to do your bidding, you're here to do her bidding."  -- Orson
"when you're riding a Guzzi you know you're riding a MOTORBIKE and not some
Pete Roper
*

Reputation 32
Offline Offline

Motorcycles: Lots of Guzzis, Aprilia Mana.
Miles Typed: 302

My Photo Gallery




Ignore
« Reply #42 on: January 06, 2012, 02:01:40 PM »

As explained on Guzzitech my guess is they interupted the upload in some way. The reboot data is the last thing installed after the mapping process is started. Interupt it and the ECU will need a full reprogramming. Only other thing known to cause ECU's to drop their load is poor earthing, Make sure the earth lead is correctly ositioned and tightened.

In this case though I think it sounds like the person driving the tooling made a mistake.

Pete
Logged
Pages: 1 2 [3]  All   Go Up
Print
Jump to:  



ST.N

Copyright © 2001 - 2012 Sport-Touring.Net.
All rights reserved.

SimplePortal 2.3.1 © 2008-2009, SimplePortal