Anyone not like the 1st gen FZ1?

[MotoYoda]

Risoma bars 1" up x 1" back risers

I tried the up/back risers, and I don't have enough cable length it seems -- and I mean anything; brake lines, clutch and throttle cables, or the wiring.  The aftermarket bars I'm using are even straighter than the Rizoma's (I've tried those too), so they should theoretically be giving me some slack, but not enough it seems.  

What/how did you have to modify to get the cables and wiring to reach?  Or did you get longer cables?

[ctfz1]

Hmm.  Rerouted wires/ cables, used longer brake lines (galfer 2 instead of three). Controls may be slightly inboard for bar end mirrors.
Tried stockbars with 1 inch risers, Risomas fit changes made, had to "lose" guide clips. for wires cables.
Friend used longer brake line to "spliter.

[MotoYoda]

Hmm.  Rerouted wires/ cables, used longer brake lines (galfer 2 instead of three). Controls may be slightly inboard for bar end mirrors.
Tried stockbars with 1 inch risers, Risomas fit changes made, had to "lose" guide clips. for wires cables

Thanks for the info.  I've never messed with brake lines before, so maybe I'll save that for a winter project.