Any Recommendations for a Welding Shop in N IL / So WI

[sscully]

I have a project I need done in Aluminum and wanted to see if anyone can recommend a shop in N IL / S WI.

I did the google maps find of them, just wanted to see if anyone had a shop they have dealt with themselves or through work.

Thanks

[mxvet57]

i had a friend that could weld aluminum but he has since retired.

[RocketmanBill]

These guys might be right by you.  

 Ability Welding Svc Incorporated
(630) 595-3737
500 Meyer Rd, Bensenville, IL 60106

I use them just about every week for work related stuff. They are great with tool steel.  

Give them a call.  VERY professional.

Owners    Wally and Randy

Bill Kobernus

[bmwrider79]

Tecnology 1 welding in carol stream IL. they are on randy road,  dont have number but quick google will get it.

good service & fair pricing

[sscully]

Thanks for the referrals.

Ability Welding Svc was one of them that came up in google, good to have a first hand account of someone using them.

Thanks again, I'll call these 2 on Monday.

[Bender]

I'm just a UPS truck away...   just sayin...

[twotrackhero]

I have a project I need done in Aluminum and wanted to see if anyone can recommend a shop in N IL / S WI.

I did the google maps find of them, just wanted to see if anyone had a shop they have dealt with themselves or through work.

Thanks

what is the magnitude of your project?

I have a pretty capable fab shop

[sscully]

what is the magnitude of your project?

I have a pretty capable fab shop

Fairly good size, I am guessing it is a 1,500.00 to 1,800.00 project for materials and labor, without shipping.

Shipping would be killer on it, the size is 58" x 23" x 25" ( LxWxH ), knocked down it would be 58" x 23" x ~10".

Thanks for the offer, MI is just a price increase on the job, that could add another ~ 300.00 in shipping costs.

It is a full vent, dual dog crate for the back seat of my SuperCrew, doors in the ends ( vs. in the front like most commercially available side by side dog crates ).

Something like this, the vent could be AL grating / different bar setup ( strong enough for the dogs ) :

[OU812]

Spencer welding in Northbrook. Used him for over 25 years. Highest quality and the price is...OK.
http://web1.userinstinct.com/15409301-spencer-welding-service.htm

[twotrackhero]

Fairly good size, I am guessing it is a 1,500.00 to 1,800.00 project for materials and labor, without shipping.

Shipping would be killer on it, the size is 58" x 23" x 25" ( LxWxH ), knocked down it would be 58" x 23" x ~10".

Thanks for the offer, MI is just a price increase on the job, that could add another ~ 300.00 in shipping costs.

It is a full vent, dual dog crate for the back seat of my SuperCrew, doors in the ends ( vs. in the front like most commercially available side by side dog crates ).

Something like this, the vent could be AL grating / different bar setup ( strong enough for the dogs ) :

If you have any trouble getting it built localy, I could help you out if needed.
That must be one heck of a dog