check out these AWESOME bike mods. . .

[stinky93071]

i wish i was that cool..

[SuperHans]

I've been looking through some of this guys stuff on Flickr and he actually has a couple of good projects. His video camera and gear indicator mount, while crude, were at least well thought out. He actually takes the time to lay out his ideas and put them on paper.  Most of his projects are poorly executed and he clearly has very little understanding of any kind of engineering principles. Thus the obvious bonehead moves like cutting holes in his frame.

He seems like a loner with little actual human interaction, kinda like County. Maybe if he actually had someone with some real fabrication skills to work with one on one he might not be doing such stupid stuff.

[Fourstring]

i wish i was that cool..

I'm glad I'm not.  That looks like a lot o' work.

[stinky93071]

wow page 25 That sprocket!!!!

[Fourstring]

Also rub some grease on the handle bar for maximum satisfaction!! If you are a good mechanic, you can repair the vehicle good, if you are an enginneer you can make a good engine, if you are a designer you can designe a good vehicle, if you are a truth Driver you know what your vehicle is missing (!!), If you are all the above, your vehicle will be the best when you fix it because you know every thing. This small rub greasing that i showed in this picture came from all of the above.

[Fourstring]

After you cleaned the brake oil container, fill the container with fresh oil brake.

[Fourstring]

So if you're in the market for a ZX-10, you should probably take a pass on this one.  

The engine number of the bike is located in the center of the bike just behind the chain, under the seat, infront of the rear suspention. A motorcycle can be known as a vehicle by having it's engine number and it's vin number.

[Papa Lazarou]

Wish he'd stop messing up that quite nice table

[Fourstring]

Not bike related, but this is my favorite.  

I got a ticket to have a white turn signal!! Can you belive that? (that's so dumb) if it is not allowed why the USA car manufactory make cars with turnsingnals in white or red (other than orange)???
Anyway i didn't want to go to the store to buy a new lamp and change it just becase it is orange. I decided to do it by myself. I designed the area of the turn signal light on a sticker paper and put small holes on it so paint goes to thos small holes.

I put the sticker on.

and i painted it.

[Flyer]

Upon second (sober) reflection, this dude's gotta be a Hasty Pudding contender.
This has "College Prank" written all over it.
Doesn't it???
 

[stinky93071]

the bike NO. I wish it was..

[phaze5]

omg. i am never going to the garage again, i can't even ask why,  i think somebody early on really told this guy he was good, and it went right to his head and now heis blind in judgement.

naw he's out of his freakin mind

[birdrunner]

I've been looking through some of this guys stuff on Flickr and he actually has a couple of good projects. His video camera and gear indicator mount, while crude, were at least well thought out. He actually takes the time to lay out his ideas and put them on paper.  Most of his projects are poorly executed and he clearly has very little understanding of any kind of engineering principles. Thus the obvious bonehead moves like cutting holes in his frame.

He seems like a loner with little actual human interaction, kinda like County. Maybe if he actually had someone with some real fabrication skills to work with one on one he might not be doing such stupid stuff.

That's why my first thought was BLS !!!!!

[falconati]

darwin award coming up

[3Bird]

He painted the brake pads on his car.

http://www.flickr.com/photos/shervinrrr/4519875743/

[2wTraveler]

At this rate this guy is going to have his own show on the Discovery channel  

[Frankienuckles]

All these years I wish I had known that all I needed to make my bike much better (like a GP bike!!!!)  was a few cans of spray paint and a driil and saw!

[birdrunner]

I was sitting there last night, thinking  "No one could be that stupid,  it has to be a joke."


Then I remembered,  this is America!.

[forester]

I was sitting there last night, thinking  "No one could be that stupid,  it has to be a joke."


Then I remembered,  this is America!.

I hate to say it, but you are exactly right.

[robrm250]

Man what a bunch of dumbasses you guys are I am sure when he puts in his 7" DVD screen back in the frame it will re-strengthen it.