Pages: [1]   Go Down
Print

Topic: Slip-in Baffles for Drummer mufflers  (Read 386 times)

0 Members and 1 Guest are viewing this topic.
Bueller
*

Reputation 3
Offline Offline

Years Contributed: '07, '09
Motorcycles: Buell XB12R, 1125R
GPS: Melbourne
Miles Typed: 654

My Photo Gallery





Ignore
« on: September 19, 2008, 05:40:04 am »

I arranged for a specialist US baffle manufacturer to develop slip-in baffles for XB9 and XB12 Drummer mufflers.  These are not in any way associated with KDFab, but KDFab has been very helpful in assisting our development.

They work really well, with quite a range of noise level options.  The solid plate has two directions quiet and mild these have a good drive by note but sound obviously muffled.  The other plate is the "wild" plate which IMO is about the same volumes as the Race muffler without the pop on decel.  It takes 2 minutes to convert between any of these options, and 4 minutes to take it out and let people know you have a Drummer.

There are times when one might feel introverted, and touring with a loud muffler is not always comfortable, but there are also times where noise is appropriate.

They sell on www.buellerparts.com.au for AU$92 at the moment.  The AUD has dropped 15% against the US in the last couple of weeks which makes all of our products better value than ever.

There is a discount of 5% for ST.N members until the end of the year.  You need to state that you are an ST.N member in the comments at the checkout. It is best to PM me as well because the site has been known to lose comments.

Logged
Sport-Touring
Advertisement
*


Remove Advertisements

Pages: [1]   Go Up
Print
Jump to:  



ST.N

Copyright © 2001 - 2013 Sport-Touring.Net.
All rights reserved.

 
SimplePortal 2.3.1 © 2008-2009, SimplePortal